Seek tuning

Press and hold either TUNEA (up) or TUNE V (down) for more than 0.5 second to activate the seek function. The unit automatically tunes in the next station with good reception. Press the button again to cancel the function. Repeat the procedure until the desired station is tuned in.

To turn the radio off

Press PW. The frequency indication goes off at the same time. If you Insert a cassette, the radio mode will automatically be canceled as well.

The LO (local/DX) trtrtton

You can use the local mode when you want to tune m only the strong signal stations during seek tuning. lntheradio mode, press LOtoselect the local mode. The’’LOC indicator llghts up.

●When you are not seek tumng, leave the unit in the DX (distance) mode. To cancel the local mode and enter the DX mode, press LO again.

●The “ST”(stereo) indicator hghts up when the tuned station ISbroadcasting m stereo and the reception condlt!on is good.

The ST (stereo/monaural) button

You can switch between the stereo and monaural modes by using this button. When the radio reception ISnot good, that maybe improved by switching to the monaural mode. The mode ISalternately changed each time you pressthls button. When in the monaural mode, the “MONO (monaural) indlcatorappears.

EN

9 I