![](/images/new-backgrounds/1018086/1808625x1.webp)
8;9’
5
4,5
‘3,7,
8,9
In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape.
1 Insert the tape into deck 1.
Insert the tape with the side to be recorded on first facing out from the unit. Wind up the tape with +.
2Press CD and load the disc(s).
3Press CDI EDIT/CHECK twice while pressing SHIFT on the remote control.
“EDIT”and “PRGM”are displayed.
●When “Al” is displayed, press CD EDIT/CHECK while pressing SHIFT again.
4Press numbered buttons on the remote control to designate the tape length.
10 to 99 minutes can be specified.
●The < and - are also available to designate the tape length.
Tape side A (front side)
Tape length | Maximum recording |
| time for side A |
5Press DISC DIRECT PLAY
Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2, then press +10 and O.
Selected track number | Remaining time on side A |
Program number | Programmed tracks |
6 Repeat step 5 for the rest of the tracks for side | ,x |
A. | ~~k. |
A track whose playing time is longer than the remaining time $ “’~~
cannot be programmed. | ! |
;;@~ |
7Press CD EDIT/CHECK while pressing SHIFTon ‘~ ~’
the remote control to select side B and program ‘J the tracks for side B.
After confirming “Bon the display, repeat step 5.
Tape side B (reverse side)
8Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A and press ●
to start recording.
CD play and recording of edited tracks for the first side start simultaneously. When the end of tape is reached, deck 1 enters the recording stop mode. After entering the recording stop mode, go to step 9.
9Press CD EDIT/CHECK while pressing SHIFT on the remote control for recording of the second side.
“B is displayed.
10 Turn over the tape in deck 1 and press O to start recording.
Recording | starts. |
|
To stop recording |
| |
Press ■/A | on deck 1. Recording and CD play stop | m |
simultaneously. |
| |
|
|
To check the order of the programmed track numbers Before recording, press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press + or
-repeatedly.
Tape side F>rogramnumber
Track number | Programmed |
| track numbers |
To change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press ■ CLEAR to clear the program on the selected side. Then program tracks again.
To clear the edit program
Press ■ CLEAR twice so that “EDITdisappears on the display.
m
●Up to 30 tracks can be programmed from any of the inserted discs.
●“FULL’is displayed if you attempt to program more than 30 tracks.