SPECIFICATIONS
Power supply | 120 V AC, 60 Hz |
Power consumption | 20 W |
Power consumption in standby mode | |
| 8 W |
Weight | 2.9 kg (6.6 lbs) |
External dimensions | 430 ⋅ 77 ⋅ 280 mm (w ⋅ h ⋅ d) |
| (17 ⋅ 3 1/8 ⋅ 11 1/8 inches) |
Laser | Semiconductor Laser , |
| wavelength 650/780 nm |
Signal format | NTSC/PAL |
Supported discs | DVD video discs |
| 12 cm |
| layer, |
| layer, |
| layer) |
| 8 cm |
| layer, |
| layer, |
| layer) |
| Compact discs |
| 12 cm and 8 cm discs |
S video output | Y output: 1 |
| negative) |
| C output: 0.3 |
| 1 Mini Din 4 pin |
Video output | Video composite output |
| 1 |
| negative) |
| 2 RCA jacks |
| Video component output |
| Y output: 1 |
| sync negative) |
| CB,CR output: 0.7 |
| ohms) |
| 3 RCA jacks (C B,CR, Y) |
Audio output | Digital output |
| 0.5 |
| 1 RCA jack |
| Analog output |
| 2.0 Vrms (1 kHz, 0 dB, 330 |
| ohms) |
| 2 RCA jacks (L/R) |
Audio output characteristics | |
| Signal to noise ratio |
| More than 100 dB (EIAJ) |
| Dynamic range |
| More than 90 dB (EIAJ) |
| Harmonic distortion |
| 0.008% |
| Frequency range: |
| CD: 4 Hz to 20 kHz |
| DVD: 4 Hz to 22 kHz |
| (48 kHz sampling) |
| 4 Hz to 44 kHz |
| (96 kHz sampling) |
Operating conditions | 5˚C to 35˚C (41˚F to 95˚F) |
Accessories | Audio/video cord (1) |
| Remote control (1) |
Specifications are subject to change without notice.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However , there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver .
-Connect the equipment into an outlet on a circuit dif ferent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Modifications or adjustments to this product, which are not expressly approved by the manufacturer , may void the user ’s right or authority to operate this product.
•Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the
• Manufactured under license from Digital Theater
Systems, Inc. US Pat. No. 5,451,942 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc. ©1996 Digital Theater systems, Inc. All rights reserved.
AS NECESSARY
En
ENGLISH 49