Aiwa XD-DV520 Press OK, Audio set, Press j/lto select "Audio set" on, Press f/gto select "Exit" and, press OK c, Press f/gto select "DRC" and, Press j/lto adjust DRC

Press OK c.

CHANGING SETUP VALUES (CONTINUED)

Audio set

To emit test tone

You can hear a noise tone emitted from the front left and right speakers alternately .

If the noise tone from the left speaker and the right speaker are heard unevenly , adjust the left and right speaker balance using the connected equipment.

1	Press j/lto select "Audio set" on
	the setup menu and press OK c.

2	Confirm that "Test Tone" is selected,
	and press OK c.

Noise tone is emitted from the front left and right speakers alternately .

3	Press OK cto stop the noise tone.
4
	Press f/gto select "Exit" and
	press OK c.

To exit the setup menu

Select "Quit" and press OK c, or press EXIT.

To adjust DRC (Dynamic Range Control)

When listening at a low volume, the volume of loud sounds such as explosions, etc., can be reduced, and the volume of quiet sounds such as whispered dialog, etc., can be increased using the DRC.

1	Press j/lto select "Audio set" on
	the setup menu and press OK c.
2
	Press f/gto select "DRC" and
	press OK c.
3
	Press j/lto adjust DRC.

Select this mode when playing back at a low volume. Pressing jtwice at the above illustration makes DRC maximum.

Select this mode when you want to enjoy the full dynamic range of sound.

Pressing lthree times at the above illustration makes DRC minimum.

4

5 Press f/gto select "Exit" and press OK c.

To exit the setup menu

Select "Quit" and press OK c, or press EXIT.

44 ENGLISH