D Connecting to a TV and an AV receiver equipped with a Dolby Digital (AC-3)
decoder
Use either a commercially available optical cord or a 75 ohm coaxial cord when connecting this unit to an | AV receiver with | |||||||
a Digital In jack. The supplied Audio/video cord is also available instead of a coaxial cord. |
| |||||||
|
|
|
|
|
|
| TV |
|
to the video input jack (yellow) |
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| yellow |
|
| Audio/video cord (supplied) |
| ||
yellow | to VIDEO OUT 1 or 2 jack (yellow) | Rear of the unit | ||
| ||||
AUDIO OUT | OUT | COMPONENT | DIGITAL OUT |
|
VIDEO OUT |
| |||
|
| Y |
|
|
L | 1 |
|
|
|
|
| CB |
|
|
R | 2 |
|
|
|
|
| CR |
|
|
|
|
| COAXIAL |
|
|
|
| to DIGITAL OUT COAXIAL jacks |
|
to an AC outlet
Coaxial cord (not supplied)
Receiver equipped with a Dolby Digital decoder
PREPARATIONS
Front speaker (L)Front speaker (R)
Surround speaker (L) | Center speaker | Subwoofer | En |
Surround speaker (R) |
Set the setup menu correctly after connecting!
Set the "TV Aspect" and "Digital out" of the setup menu according to the audio equipment and TV connected to the unit as follows:
(See "CHANGING SETUP VALUES" on page 40 for details.)
Digital out
"Dolby Digital" to "Bitstream" "DTS" to "Off"
TV Aspect
When your TV is a
When your TV is a
CAUTION
When connecting an AV receiver not equipped with a Dolby
Digital decoder using a coaxial connecting cord, do not
set "Dolby Digital" to "Bitstream" in "Digital out" of the setup menu.
Merely attempting to play a DVD may cause a screeching noise which could be harmful to your ears and damage the speakers. In such a case, be sure to set "Dolby Digital" to "PCM" in "Digital Out".
CONTINUE
ENGLISH 15