V
V
K |
L |
1 ENTER/DISP
2
3 ENTER/DISP
5
Note
•Resume play may start at a point about 30 seconds behind or ahead the stopped point. Resume play may not operate if you stopped at the last 30 seconds of the final track.
•Resume play will be canceled if you open the disc compartment. If the unit is turned off, resume play will not be canceled. In this case, be sure to set the HOLD switch to OFF before changing discs.
Random play → K
Press PLAY MODE while in standby mode to display 
. Tracks on the disc are played in random order.
To cancel random play, press PLAY MODE while in standby mode.
display changes to 
.
Note
•You cannot back to previous track by pressing rduring random play.
•You cannot select
Repeat play → K
Press PLAY MODE during playback to select repeat play as follows.
:
V
:
V
no repeat play (normal play)
PROGRAM PLAY → L
Up to 24 tracks can be chosen for program play.
1Press ENTER/DISP while in standby mode to display 
.
2Select the desired track by pressing r and t. a track number
b program number
3Press ENTER/DISP within 8 seconds.
If it is not pressed within 8 seconds, the track number changes to 00. Repeat the procedure from step 2 again.
4Repeat steps 2 and 3 to program more tracks.
5Press ePLAY/PAUSE to start program play.
To stop program play
Press sSTOP/OFF/CHARGE.
To add tracks to the program
Repeat steps 2 and 3 before you proceed to step 5. You can add tracks to the end of the program.
To erase the program
Press sSTOP/OFF/CHARGE while in standby mode.
To check the programmed tracks
Press ENTER/DISP repeatedly before you proceed to step 5.
The number of each programmed track will be displayed in order of playback.
Note
•The program is also erased when the disc compartment is opened or the auto power off function turns the power off.
•When 24 tracks are programmed,
•You cannot back to the previous track by holding rpressed during program play.
•Repeat play and random play can be performed during program play.
