SOUND ADJUSTMENTS

Adjustments

To switch to monaural FM reception

Hold down SHIFT and press TUNER MODE on the remote control so that "MONO" is displayed.

To cancel, repeat the above so that “STEREO” is displayed.Tip:When FM stereo reception is poor, switching to monaural
BASS,￿TREBLEVOLUMETONE

En

reduces noise.To switch the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Hold down TUNER/BAND and press POWER on the main unit.

Tip:

When the AM tuning interval is changed, all preset stations are cleared.

f,g

VOLUME +,-

Volume

Bass and treble

Turn VOLUME (press VOLUME +,- on the remoteTurn BASS or TREBLE.
control).

The bass or treble level can be adjusted from –5 to “+5”.

Adjust from 0 (minimum) to 41 and MAX (maximum).

 

Tip:

Volume level setting is retained during power-off standby. If the unit is turned off with the volume set to 25 or higher, it is automatically turned down to 24 the next time the unit is turned on.

To operate on the remote control

1 Press TONE repeatedly to display “BAS” or “TRE”. 2 Within 6 seconds, press for g.

• If the sound becomes distorted, lower the level.

11