Aiwa XR-MN5 manual Shuffle play, Repeat play, Programmed play

Shuffle play

In shuffle play mode the unit plays all the tracks on the disc inserted in random order.

1In stop mode, press SHUFFLE/PROGRAM on the remote repeatedly until the "SHUF" indicator is displayed.

2Press ECD to start play.

To cancel shuffle play

In stop mode, press SHUFFLE/PROGRAM on the remote repeatedly until the "SHUF" indicator disappears.

Repeat play

In repeat play mode the unit repeatedly plays all the tracks or the current track being played on the discs.

Press REPEAT on the remote repeatedly. The mode changes as follows:

""": Plays all the tracks repeatedly. (up to 5 times)

To play one desired disc, press the desired CD slot button (1-5).

To play all the discs, press ECD.

""1": Plays one track repeatedly. Select the track with f or g.

To cancel repeat play

Press REPEAT on the remote repeatedly until """ and ""1" disappears.

Programmed play

Plays back up to 30 selected tracks in programmed order.

1In stop mode, press SHUFFLE/PROGRAM on the remote repeatedly until the "PGM" indicator is displayed.

2Press DISC SELECT on the remote, then press the numbered buttons (1-5) to select a disc.

Go to the next step when "CD CHANGE" disappears.

3Press the numbered buttons on the remote to program a track.

The selected track number lights up on the display. To select the 10th track, press 10/0.

To select the 20th track, press >10, 2 and 10/0. To select the 35th track, press >10, 3 and 5.

You can select a track by pressing f or g and then press ENTER.

4Repeat step 2 and 3 to program other tracks.

5Press ECD.

•During programmed playback, you cannot select a disc or a track with the numbered buttons.

•If the total playback time of the program exceeds 99:59 minutes, or if a track with a track number exceeding 30 is programmed, the playing time is displayed as "--:--".

•You cannot program more than 30 tracks. "Full" is displayed.

To clear a previous track

Press CLEAR on the remote. Each time you press the button, a track is cleared from the end of the program.

To clear the entire program

Press sin stop mode.

To add a track to the program

Repeat steps 2 and 3 before starting playback. The track is added to the end of the program.

To cancel programed play
Press SHUFFLE/PROGRAM repeatedly until "PGM"
disappears.
•The program content is retained even if the program
cancelled or after programmed playback finishes. The same	En
program plays back if you carry out step 1 and 5.

When transporting the unit

Please carry out procedures below to prevent the breakage of CD mechanism.

1Eject all the CDs and the tapes.

2Press POWER6STANDBY/ON (POWER on the remote) to turn the unit off.

3Disconnect the AC power cord from the wall outlet.

Notes on CDs

•Do not tilt the unit with a disc inserted.

•Discs recorded on CD-R/RW drives may not be played back because of scratches, dirt, recording condition or the drive's characteristics.

•CD-R/RW discs which are not finalized at the end of recording cannot be played back.

•Do not load an unrecorded CD-R/RW disc. The disc may be damaged.

11