Aiwa XR-MN5 manual Adjustments Before Operation, Setting the clock, Power, Dimmer, ECO mode

ADJUSTMENTS BEFORE OPERATION

POWER 6STANDBY/ON

ECO/RDS

f,g

En

ECD,	POWER
TUNER/
BAND,	CLOCK
dTAPE,
AUX
		ENTER
	ECD,	f,g
	TUNER/
	BAND,

dTAPE,

AUX

SHIFT

DIMMER

Setting the clock

1	In stop mode, hold down SHIFT and press CLOCK
	on the remote.
	Go to step 3 when the hour of the clock display flashes.
2	Within 6 seconds, press ENTER.
	The hour flashes in the display.
3	Press f or g to set the hour, then press
	ENTER.
4	Press for gto set the minute.
	Each press changes the time in 1-minute steps.
5	Press ENTER.
	The time display stops flashing and the clock starts from

Power

Turning the unit on

Press POWER 6STANDBY/ON (POWER on the remote ). Alternatively, press dTAPE, TUNER/BAND, AUX, ECD or one of the CD slot buttons (1-5). Playback will start automatically if a disc or tape is loaded.

Turning the unit off

Press POWER 6STANDBY/ON again.

The unit goes into standby.

Dimmer

The display window brightness can be selected.

Press DIMMER on the remote.

Each press of the button changes between darker and brighter.

ECO mode

Reduces power consumption in standby mode with the following operations.

Press ECO/RDS.

Each press of the button changes the mode as follows;

ECO ON: Power economizing mode is activated.

When the unit turns off, everything on the display clears and only the red indicator above POWER lights to show that the power is being supplied.

ECO OFF: Power economizing mode is cancelled. When the unit turns off, the clock display appears.

Initial mode is ECO OFF.

Standby power consumption

ECO ON: 0.26 W

ECO OFF: 15 W

00 seconds.

To display the time while the power is on

Hold down SHIFT and press CLOCK on the remote. The time will be displayed for 6 seconds.

If "- -:--" appears when the unit is turned off

There has been a power interruption. Reset the clock.

8