Aiwa XR-X77 TIMER OPERATIONS, Sleep timer, Setting the clock, SET, f,g, POWER, CLOCK, TIMER, SLEEP, SET f,g, s VOLUME, 3Press SET, SHIFT VOLUME+, TUNER/BAND, AUX, ECD

TIMER OPERATIONS

TUNER/BAND, AUX, ECDSET

POWER	s VOLUME
6STANDBY/ON	f,g
	f,g

Setting the clock

1Hold down SHIFT and press CLOCK on the remote control.

When the unit is turned off, you can also press SET.

2Within 6 seconds, press for gto set the time.

Each press changes the time in 1-minute steps. Holding these buttons down will vary the time in 10-minute units.

3Press SET.The time display stops flashing and the clock starts from 00 seconds.

POWER

CLOCKTIMER

TUNER/BAND, AUX, ECD,

SET f,g

SHIFT VOLUME+,-SLEEPTo display the time while the power is on

Hold down SHIFT and press CLOCK on the remote control. The time will be displayed for 6 seconds.

To switch to the 24-hour standardDisplay the time and press swithin 6 seconds.With each press, the clock alternates between 12- and 24- hour standard time.

Tip:

In the 12-hour standard, "AM12:00" indicates midnight and "PM12:00" noon.If the clock display flashes when the unit is turned off

There has been a power interruption. Reset the clock.

Sleep timer

Turns off the unit automatically after a specified time.

1Press SLEEP on the remote control. "SLEEP" is displayed.2Within 6 seconds, press for grepeatedly to set the sleep timer duration.

With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes. If there is no button input for 6 seconds, the current setting is entered automatically. The unit turns off after the selected time.

To check the remaining time until the unit turns off Press SLEEP on the remote control. The remaining time is displayed for 6 seconds.

To cancel the sleep timerPress SLEEP on the remote control repeatedly so that "SLEEP oFF" is displayed.