PREPARATIONS

Connection

Plug in the AC power cord to the AC outlet after all other connections are made.

1 Connect the speaker cords to the speakers. Connect the copper cords to the + terminals and the silver

3Connect the supplied antennas.

Connect the FM antenna to the FM 75 Ω terminals and the AM antenna to the AM LOOP jack. Connect the FM antenna to the FM 75 Ω terminals without the 2mark, as illustrated.

FM antenna

Remote control

Detach the battery compartment lid at the rear of the remote control and insert two R6 (size AA) batteries with correct polarity.

En

cords to the – terminals.

AM antenna

R6(AA)
2Connect the speakers to the main unit.

Connect the right speaker to the SPEAKERS 3R terminals and the left to the SPEAKERS 3L terminals. The copper

cords go to the terminals.

4Connect the AC power cord to an AC outlet. The clock will flash on the display.

For setting the clock, see page 12.
Speakers

•Do not short-circuit the and speaker cord leads. •Do not leave objects generating magnetism or objects

affected by magnetism near the speakers.
Antennas
Keep antennas away from metallic objects, electrical equipment and cords.

•FM antenna: Extend fully and position for the best

reception. If reception is poor, connect an optional outdoor antenna to the FM 75 Ω terminals. When connecting an optional outdoor antenna, be sure to connect the shield braid of the antenna to the 2terminal.

•AM antenna: Rotate to find best reception.

•Replace the batteries with new ones when the operational distance between the remote control and main unit becomes shorter.

•Remove the batteries if the unit is not going to be used for an extended period of time.

•The remote control may not operate if it is used under intense sunlight or if its line of sight is obstructed.

4