Random/Repeat play

In random play mode the unit plays all the tracks in random order. In repeat play mode it plays repeatedly all the tracks or the track being played. You can select random and repeat all play at the same time.

1Press RANDOM/REPEAT repeatedly on the remote control.The mode changes as follows:""1": Plays one track repeatedly. Select the track with for g.""": Plays all the tracks repeatedly."RANDOM": Plays all the tracks randomly."RANDOM "": Plays all the tracks repeatedly in random order.

2Press Eto start play.

To cancel random/repeat play

Press RANDOM/REPEAT on the remote control repeatedly until "RANDOM" or """ disappears.

Direct selection of the tracks with the numbered buttons cancels random play mode.

To repeat a selected set of tracksFirst select the tracks with programmed play (see "Programmed play").Then select repeat playback.
Programmed play

Plays back up to 30 selected tracks in programmed order.

1Press PROGRAM on the remote control in stop mode."PRGM" flashes on the display.2Press the numbered buttons on the remote control to program a track.

-To select the 25th track, press +10, +10 and 5. -To select the 11th track, press +10 and 1.

The selected track number lights up on the display.

3Repeat step 2 to program other tracks.The total number of selected tracks and total playing time will be displayed.4Press Eto start play.The track number for the current track flashes on the display.

•During programmed play, you cannot select a track with the numbered buttons. "Can’t USE" is displayed when you try to select a track .

•If the total playing time of the program exceeds 99 minutes and 59 seconds, or if a track with a track number exceeding 30 is programmed, the playing time is displayed as "- - : - -".

•You cannot program more than 30 tracks. "FULL" is displayed.
To check the program

Press f or g repeatedly in stop mode. The track number and program number are displayed in succession.

To clear the program

Press sin stop mode. "PRGM" disappears from the display.

To add tracks to the program

Repeat step 2 before starting playback. The tracks are added En to the end of the program.

To change the programmed tracksClear the program and repeat all the steps again.Notes on CDs

•Do not place more than one disc. •Do not tilt the unit with a disc loaded.

•The unit may not play CD-R/RW discs recorded on personal computers or certain kinds of CD-R/RW recorders.

•Do not attach adhesive label to either side of CD-R/RW discs, as doing so may cause malfunction.

•Do not load an unrecorded CD-R/RW disc. The disc may be damaged.

9