Akai CT-2107ASF operation manual Colour Sys, Sound Sys, Skip On/Off

10、RECALL

Press the RECALL button and the TV will directly skip back to the former program channel.

11、SLEEP

This button is used to set fast off time, the adjustale range is 0,5,10,15,………120,0 minutes,press this button

repeatly,and you can select what time you want to set.

12、SCAN

Press the SCAN button to scan programs from the current channel. To stop scanning and start the corresponding operation, please press SCAN button again or any other buttons.

*13、ZOOM（If the button does not function, it means this TV does not support this function.） Press the zoom button ,and the TV will switch between 4：3, 16：9 and zoom.

*14、SOUND MODE（If the button does not function, it means this TV does not support this function.） There are 4 sound modes to select such as userÎnews Îmusic Îtheatre.

And the user mode can be regulated in the SOUND MENU.

MENUS OPERATION

Menus

Press the MENU button when watching TV programs, Press buttons to select and press buttons

to enter, then press the buttons to adjust.

Menu display disappears 15 seconds after last selection. Note: In the AV mode, TUNE menu is not available.

Tune Menu

This section gives descriptions about adjustment of items in the TUNE menu. This menu will display Channel/Colour Sys/Sound Sys/Skip/Frequency/Fine Tune/Auto Search and Swap.

	TUNE
Channel	9
Colour Sys	Auto
Sound Sys	DK
Skip	Off
Frequency	066.75MHZ
Fine Tune
Auto Search
Swap
SELECT	ADJUST
1. Channel

Press buttons to change the channels one by one.

2. Colour Sys

Press buttons to choose the Colour Sys, It is very important to set the correct colour system,suggest to set it “Auto”.

3. Sound Sys

Press buttons to choose the Sound Sys.It is very important to set the correct sound system,otherwise much boring noise will be heard.

4. Skip On/Off

After Auto Search, there may be some repeated program or inferior signals received. Skipping the undesired program position can dramatically quicken channel selection.

After selecting "Skip" in the TUNE menu, press the buttons to set "Skip On". When the TUNE menu has disappeared, press the CH-/CH+ buttons and you will find the channel number skipped.

5