5 Troubleshooting
Problem |
| Possible Cause |
| Remedy |
| 1. | Power to mixer | 1. | Switch power to |
|
| and/or amplifier is off. |
| mixer or amplifier on. |
| 2. | Channel or master | 2. | Set channel or master |
|
| fader on mixer, or vol- |
| fader on mixer or vol- |
|
| ume control on ampli- |
| ume control on ampli- |
|
| fier is at zero. |
| fier to desired level. |
No sound. | 3. | Microphone is not | 3. | Connect microphone |
| connected to mixer or |
| to mixer or amplifier. | |
|
| amplifier. |
|
|
| 4. | Cable connectors are | 4. | Check cable connec- |
|
| seated loosely. |
| tors for secure seat. |
| 5. | Cable is defective. | 5. | Check cable and re- |
|
|
|
| place if damaged. |
| 6. | No supply voltage. | 6. | Switch phantom |
|
|
|
| power on. |
|
|
|
| Check cable and re- |
|
|
|
| place if necessary. |
|
|
|
|
|
| 1. | Gain control on mixer | 1. | Set gain control to |
Distortion. |
| or transmitter module |
| stop distortion. |
| not set correctly. |
|
| |
| 2. | Mixer input sensitivity | 2. | Insert 10 dB preatten- |
|
| too high. |
| uation pad between |
|
|
|
| microphone cable |
|
|
|
| and input. |
|
|
|
|
|
Microphone sound be- | • | Internal or external | • | Clean internal or ex- |
comes duller |
| windscreen attenu- |
| ternal windscreen. |
by and by. |
| ates high frequencies |
|
|
|
| when soiled. |
|
|
|
|
|
|
|
20 | AKG C 5 |
