3 Connecting to Power
• Check that the AC mains voltage stated on the included power supply is identi- Important! cal to the AC mains voltage available where you will use your system. Using the
power supply with a different AC voltage may damage the unit.
•Do not use any power supply other than the AC adapter supplied with the charger.
•Never connect the CU 400 charger to the PSU 4000 central power supply be- cause the output voltage of the PSU 4000 is incompatible with the CU 400.
1.Connect the DC cable of the supplied AC adapter to the DC 5 V jack on the charger rear panel.
2.Connect the AC adapter to a convenient power outlet.
3.The charger is ready to operate. Note that both STATUS LEDs remain dark.
CU 400 | 15 |
|
|
