2 Description
Introduction | Thank you for purchasing an AKG product. This Manual contains important instructions for |
| setting up and operating your equipment. Please take a few minutes to read the instruc- |
| tions below carefully before operating the equipment. Please keep the Manual for fu- |
| ture reference. Have fun and impress your audience! |
Packing List | 1 CU 400 charger |
| 1 AC adapter (if checked on the packaging) |
| 2 AA size NiMH rechargeable batteries (2100 mAh) |
| • Check that the packaging contains all of the items listed above. Should anything be |
| missing, please contact your AKG dealer. |
Description | The charger provides two charging slots specially shaped to accept AKG handheld or body- |
| pack transmitters. The charging slots operate completely independently so you can charge |
| two rechargeable batteries simultaneously. You do not need to remove the battery from the |
| transmitter for charging. |
| Designed specifically for use with AKG transmitters, the CU 400 charger |
| • monitors battery voltages and temperatures during charging; |
| • generates a flag signaling the end of the charging cycle upon reaching maximum ca- |
| pacity; |
| • monitors all required safety parameters and will stop the charging cycle if one or more |
| safety parameters are out of range. |
| The charger checks the battery inside the transmitter and will automatically deactivate the |
| charging function if it detects a dry battery. |
Indicators | There is one STATUS LED in front of each charging slot. |
| These tricolor (red/orange/green) LEDs indicate the current operating status of the charger. |
DC Input | The DC 5V jack on the rear panel accepts the DC cable on the included AC adapter. |
14 | CU 400 |
|
|
