2 Description
2.1 Introduction
Thank you for purchasing an AKG product. Please take a few minutes to read the instructions below carefully before operating the equip- ment. Please keep the Manual for future refer- ence. Have fun and impress your audience!
2.2 Packing List
1 GB 40 FLEXX | 1 long adapter | 1 AAA size |
transmitter | plug | dry batery |
|
|
|
2 battery com- |
| 1 pairf of |
partment lids | 1 screwdriver | Velcro pads |
|
|
|
• Check that the package contains all the parts
listed above. If anything is missing, please con- tact your AKG dealer.
2.3 Optional Accessories
•For optional accessories, refer to the current AKG catalog or folder, or visit www.akg.com. Your dealer will be glad to help.
2.4 Description
The GB 40 FLEXX is a WMS 40 microtools Series miniature transmitter that has been specifically designed for electric guitars and basses but is also suited for keyboards.
The transmitter features a permanently attached, swiveling 1/4" jack plug that allows you to plug the transmitter directly into the output jack of your instrument. A
The supplied Velcro pads allow you to attach the transmitter even more firmly to the instrument. Operating in the 660 MHz to 865 MHz UHF range, the GB 40 FLEXX provides three selectable, quartz stabi- lized carrier frequencies within the
2.5Controls (refer to fig. 1 on page 13)
1ON/MUTE/OFF: This slide switch provides three positions:
ON: Power to the transmitter is on.
M: The signal delivered by the microphone is muted while power and the RF carrier frequen- cy remain on. This prevents the receiver re- sponding to interference from other transmit- ters.
OFF: Power to the transmitter is off.
2Battery compartment for one
12 | GB 40 FLEXX guitarbug |
