AKG Acoustics GB 40 manual Inserting a battery, Using Rechargeable Batteries

Models: GB 40

1 52
Download 52 pages 37.67 Kb
Page 14
Image 14
Fig. 2: Inserting a battery.

￿

￿

￿

￿

Fig. 2: Inserting a battery.

As long as the battery is in good condition, the status LED (4) will flash red momentarily and will then be lit green constantly.

If the status LED (4) lights red constantly the battery will be dead within about 60 minutes. Replace the battery with a new one as soon as possible.

If the status LED (4) fails to flash momentarily the battery is dead. Insert a new battery.

6.Slide the battery compartment lid (1) onto the transmitter against the direction of the arrow to the point that the lid (1) will click shut.

3.2 Using Rechargeable Batteries)

Instead of dry batteries, you can also use a 1.2-V rechargeable battery to power the transmitter. We recommend SANYO HR-4U (650 mAh) or Pana- sonic Rechargeable PRO+ (550 mAh) NiMH re- chargeable batteries.

Note: If you use a rechargeable battery, the LED will switch to red 15 to 20 minutes before the battery will be dead!

14

GB 40 FLEXX guitarbug

Page 14
Image 14
AKG Acoustics GB 40 manual Inserting a battery, Using Rechargeable Batteries