AKG Acoustics WLS 6060 MAX specifications Wireless PA System Description, Features

WLS 6060 MAX

Wireless PA System

Description

The AKG Acoustics Model WLS 6060 MAX wireless PA system is built around an integrated wireless receiver, preamplifier/amplifier and loudspeaker combination, all housed in a moderate size enclosure that weighs only 26.5 lbs. (12 kg). The amplifier section has a peak power rating of 60 watts, and the two-way loudspeaker system can produce peak output levels of 114 dB at a reference distance of 1 meter. When fully charged, the system will operate for 10 to 14 hours, depending on the duty cycle. The system can be charged from the ac power line while it is in full operational mode. It can be left in the charge mode indefinitely with no adverse effects.

The wireless input can be either by way of a handheld microphone (choice of D 3800 WL/1, C 5900 WL/1, or C 535 WL/1 head units) or by way of a bodypack, which can accommodate a variety of microphone accessories as listed in the specifications section. The integral WMS60 wireless microphone system can accommodate up to 15 channels, operating over the carrier frequency range from 182 to 205.7 MHz.

The built-in mixer independently accommodates three inputs: microphone (wired, 12-volt phantom powering), microphone (wireless) and music. There is a channel selector for wireless operation, a two- band equalizer for matching the system’s loudspeaker to a specific operating environment, and an automatic speech filter limiter with subsonic filter for maintaining a consistent output level. A status LED indicates when the WLS6060 is on a ready to operate. When the LED turns red, the battery is low and the system must be plugged into the ac power source for recharging. A constant yellow LED indicates the battery is being charged, and as soon as the charging cycle is completed the yellow LED will flash.

Additional WLS 6060 modules can be fed by the host module for added output capability and extended coverage.

Features

•Self-contained microphone, preamp, and battery powered public address system

•Works for 10 to 14 hours on battery power

•Wireless microphone capability for maximum mobility

•“Smart” signal processing for controlled, distortionless, and highly intelligible speech quality

•Multiple speaker units may be stacked for greater coverage

•Ideal for seminars, exhibition booth activity, as well as on- stage solo instruments