2.3Hardware Installation

Note: Alacritech server adapters use components that are sensitive to ESD. Proper ESD handling and storage should be followed.

Note: Windows 2000 automatically loads driver software upon detection of new PCI hardware. To aid this process, the Windows 2000 software pre- installation must be performed before hardware is installed.

1.Turn off and unplug the computer. Failure to do so could endanger you, and may damage the adapter or computer.

2.Remove the computer cover, and install the 100 Series adapter in any available bus-mastering PCI slot. Use a 64-bit PCI slot, if available, to maximize system performance. The 100 Series is fully compatible with 32-bit PCI slots, and 3.3 volt or 5.0 volt PCI slots. Some PCI slots have fasteners, which must be secured in order for the adapter card to function correctly.

3.Replace the computer cover, turn on and boot the computer.

2-4

Alacritech 100 Series Hardware Installation Guide