Alamo 02983328C 4.CONNECTING ATTACHING HEADS TO THE BOOM

OPERATION

AXTREME 03/09 Operation Section 3-8

OPERATION

Never run the Tractor engine in a closed building or without adequate ventilation. The

exhaust fumes can be hazardous to your health. (SG-23)

Start tractor only when properly seated in the Tractor seat. Starting a

tractor in gear can result in injury or death. Read the Tractor operators

manual for prop er starting instructions. (SG-13)

4.CONNECTING ATTACHING HEADS TO THE BOOM

1. Start by using a hoist to lower the boom(1) down

to the head(2). Align the Boom with the Head Hitch

Post(3), insert the upper hitch pin(4) through the

Dipper end of the boom and the Head Upper Hitch

Post. Attach with washer(5), nut(6) , and cotter

pin(13).

2. Then align the lower linkage(7) of the Boom and

insert the lower hitch pin(8) throught hitch post.

ttach with nut(9 ) and bolt(10).

3. Finally make sure all bolts, nuts, and pins are

tightened to recommended torque . OPS-B- 0004_C

Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and

hose connections. Relieve hydraulic pressure before performing maintenance or repairs.

Use gloves and eye protection when servicing hot components. Contact with a hot surface

or fluid can cause ser io us inju ry from burns or scalding. (SG-34)

Do not operate this Equipment with hydraulic oil or fuel leaking. Oil

and fuel are explosive and their presence could present a hazard. Do

not check for leaks with your hand! High-pressure oil streams from

breaks in the line could penetrate the skin and cause tissue damage

including gangrene. To check for a hose leak, SHUT the unit ENGINE

OFF and remove all hydr aul ic p ressure. Wear oil impenetrable gloves,

safety glasses and use Cardboard to check for evidence of oil le aks. If

you suspect a leak, REMOVE the HOSE and have it teste d at a Dealer.

If oil does penetrate the skin, have the injury treated immediately by a

physician knowledgeable and skilled in this procedure. (SG-15)