OPERATION
AXTREME 03/09 Operation Section 3-46
©2009 Alamo Group Inc.
OPERATION
BuzzBar® Tree Limb Cutter
• The BuzzBar Tree Limb Cutter is rated for
material up to 4” in diameter.
• Suggested cutting S peed for the Buzzbar is 1st
gear. Slow down for thick, dense, or hard
material.
• Always cut with the boom positioned
perpinducular to the limbs being cut (see
diagram). Cutting with the boom swing
backward or forward will cause the blades to
warp from “raking” through the cut material.
• For maximum blade life, do not allow the
blades to contact hard items such as the
ground or metal objects.
• Check belt tension daily.If belts start to slip
adjust tension soon. The more belt slippage,
the more they will wear and looser they
become.
• Grease bearings of saw blade spindles daily.
• Two pumps from hand grease gun.
• When operating the unit be sure there are no
bystande rs or animals with in 100 yards of the
unit.
OPS-B- 0043
Timber Cat
• The T imber Cat Sickle Bar Limb Cutter is rated
for material up to 4” in diameter.
• The Timber Cat is operated attached to the
boom arm and is ideal for trimming populated
areas where a sm oo th cut is req uir e d.
• When operating the Timber Cat correctly the
limbs fall straight down for easy disposal and
clean-up.
• When operating the unit be sure there are no
bystande rs or animals with in 100 yards of the
unit.
OPS-B- 0044