Sharp MD-SR50H Error Messages, References, Meaning, Remedy, Batt Empty, Blank Md, Can’t COPY

References

412

Error Messages

ERROR MESSAGES	MEANING	REMEDY
BATT EMPTY	● The battery is run down.	● Charge the rechargeable battery or replace the alka-
		line battery (or use the AC adaptor for power).
BLANK MD	● Nothing is recorded.	● Replace the disc with a recorded disc.
Can’t COPY	● You tried to record from a copy pro-	● Record using the analogue cable.
	hibited MiniDisc.
Can’t EDIT	● A track cannot be edited.	● Change the stop position of the track and then edit it.
Can’t READ (*)	● The disc data cannot be read be-	● Reload the disc.
	cause the disc is damaged.	● Replace it with another recorded disc.
Can’t REC	● Recording cannot be performed cor-	● Re-record or replace it with another recordable disc.
	rectly due to vibration or shock.
Can’t STAMP	● Stamp function does not work.	● Check the number of tracks.
	● Cannot save the TOC information	● Replace the disc with another recordable disc.
Can’t WRITE	correctly to a MiniDisc. (A large por-
	tion of the disc has been damaged.)
DEFECT	● The disc is scratched.	● If the sound you hear is not right, record again.
		● Replace the disc with another recordable disc.
DISC FULL	● The disc is out of recording space.	● Replace it with another recordable disc.
Er-MD (**)	● The microprocessor has reported a	● To have it repaired, go to the distributor where you
	system fault and the unit is out of or-	purchased the unit.
	der.
HOLD	● The unit is in the hold mode.	● Return the HOLD switch to its original position.
LOCKED	● You removed a MiniDisc whilst re-	● Turn off the power and remove the MiniDisc.
	cording or editing.
NO DISC	● A disc has not been loaded.	● Load a disc.

Number or symbol appears in (*) position.