Sharp MD-SR50H operation manual 1920, About track numbers, About sampling rate converter

Advanced Recording : continued

Features

About track numbers

1.Track numbers are created automatically during re- cording via the analogue connection when a silence of 1 second or more is detected (Auto marker func- tion). A series of tracks can be recorded as one by disabling the auto marker function see page 18.

	About 1
	second
	Silence
First	Second
track	track

2.When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function).

●When recording, if a programmed playback is performed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source.

●Track numbers may not be created properly, depending on the connected stereo system.

About sampling rate converter

This unit incorporates a sampling rate converter.

When this unit is connected to digital equipment such as digital radios or DAT tape recorders that use a different sampling frequency (32 kHz or 48 kHz), recordings can still be made. (The sampling frequency of this unit is 44.1 kHz.)

Note for digital recording

Useful

Playback side

Recording side

First track

Track A

First track

Track A

Second track Third track

Track B Track C

Second track Third track

Track B Track C

You can not copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analogue inputs is not affected.

Digital signals	Digitally recorded	Cannot record
	MiniDisc

1920

●Track numbers may not be created in proper places, depending on the source to be recorded from, such as signals with noise.

●The track numbers on the playback side may not match the track numbers recorded on the MiniDisc.

CD player, MiniDisc player,

etc. DigitalDigital

connection connection