Sharp MD-SR50H operation manual 1514, Basic operation, Press the 06 button, Press the / OFF button

Models: MD-SR50H

1 48
Download 48 pages 46.95 Kb
Page 15
Image 15
1514

Basic operation

1 Insert the earphones plug into the socket.

2 Insert a MiniDisc (page 8).

3 Press the 06 button.

Playback starts automatically with a playback only MiniDisc or a MiniDisc which is protected against accidental erasure (Auto-play function).

To interrupt playback

Press the 06 button.

To resume playback, press the 06 button again.

To stop playback

Press the • /:OFF button.

If the unit is not operated for at least 2 minutes whilst in the stop mode, the power will shut off automatically.

To turn off the power

Press the • /:OFF button whilst in the stop mode.

Volume control

Press the VOL+ button to increase the volume and the VOL– button to decrease the volume.

Volume (0 - 30)

Bass control

Each time the BASS button is pressed, the tone will be switched as follows.

BASS 1

Emphasised slightly

BASS 2

Emphasised more

BASS 3

Emphasised fully

BASS OFF

Cancelled

Notes:

If power failure occurs whilst playing a disc using the AC adaptor, disconnect it from the wall socket. Otherwise, play- back may start automatically when electricity resumes.

If you connect the AC adaptor without installing the re- chargeable battery, playback may start automatically. Be sure to turn off the power.

Reduce the volume before starting to play. MiniDiscs, compared to ordinary cassette tapes, have very little noise. If the volume is adjusted according to your usual expectations of noise, high volume may damage your hearing.

The sound escaping from your earphones may annoy people around you.

In particularly crowded places (such as on trains or buses), reduce the volume.

1514

Page 15
Image 15
Sharp MD-SR50H operation manual 1514, Basic operation, Press the 06 button, Press the / OFF button