(SG-18)
(SPRM-2)
(SG-14)
(SG-8)
(SG-28)
(SG-5)
(SG-21)

SAFETY

Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order.

SAFETY

Always maintain the safety signs in good readable condition. If the safety signs are missing, damaged, or unreadable, obtain and install replacement safety signs immediately.

Do Not fill fuel tank while engine is running. Refuel only after engine has cooled down. If fuel is spilled, move machine away from the area of the spill and avoid creating any source of ignition until the gasoline has evaporated.

Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement, any of its components or any Implement function.

Never work under the Implement, the framework, or any lifted component unless the Implement is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death.

PARTS INFORMATION

Rhino products are designed utilizing specifically matched system components to ensure optimum equipment performance. These parts are made and tested to Rhino specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit” parts may reduce equipment performance, void warranties, and present a safety hazard. Use genuine Rhino parts for economy and safety.

SEE YOUR RHINO DEALER

Concluding Safety Instructions and Practices

In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment.

F-4145 01/11

Safety Section 1-14

© 2011 Alamo Group Inc.

Page 17 Page 19
Page 18
Image 18
Alamo 95C manual Parts Information, See Your Rhino Dealer
Page 17 Page 19

95C specifications

The Alamo 95C is a sophisticated compact tractor that has been designed to meet the demands of both agricultural and light industrial applications. With its robust construction and versatile functionalities, it has become a popular choice among farmers, landscapers, and small property owners.

One of the standout features of the Alamo 95C is its powerful engine. Equipped with a reliable diesel power plant, it delivers impressive performance while maintaining fuel efficiency. The engine is tailored to produce high torque at low RPM, ensuring that the tractor can handle tough tasks with ease, from plowing fields to hauling heavy loads.

The Alamo 95C is designed for ease of operation. It features an ergonomic control layout and a comfortable operator platform, allowing for prolonged use without causing fatigue. The intuitive controls and simplified interface make it accessible even for less experienced operators. Its tight turning radius enhances maneuverability, making it ideal for working in confined spaces.

In terms of technology, the Alamo 95C is outfitted with modern electronic systems that improve overall performance and efficiency. The tractor comes with a digital dashboard that provides real-time data on engine parameters, fuel levels, and other vital statistics. This allows operators to monitor performance closely and make informed decisions while working.

The Alamo 95C is also designed with versatility in mind. It can be outfitted with a range of attachments, including loaders, backhoes, and mowers, enabling it to adapt to various tasks. The three-point hitch system allows for easy attachment of implements, while the Power Take-Off (PTO) system ensures that it can power a variety of tools and equipment.

Durability is another key characteristic of the Alamo 95C. Its frame is constructed from high-quality materials, ensuring it can withstand harsh working conditions. Additionally, it has been engineered for ease of maintenance, with accessible components that simplify routine checks and repairs.

Overall, the Alamo 95C combines power, efficiency, and versatility, making it an excellent investment for anyone looking to maximize productivity on their property. With its advanced features and robust design, it continues to set a standard in the compact tractor market. Whether for agricultural purposes or landscaping tasks, the Alamo 95C proves to be a dependable and efficient workhorse.
Top Page Image Contents