Manuals / Alamo / Lawn and Garden / Compact Excavator

Alamo 95C manual PRE-OPERATION Checklist, Operating Directions, Engine Speed, Controls, Boom/Swing

Models: 95C

1 56
Download 56 pages 20.68 Kb
Page 34
Image 34

OPERATION

OPERATION

CAUTION: To avoid possible injury, observe the following safety rules BEFORE

OPERATING backhoe.

•Be sure area is clear of underground utilities or other hazards.

•Position a barricade around work area.

•Keep bystanders a safe distance away.

PRE-OPERATION CHECKLIST

This backhoe is designed for safety, durability and operator convenience. To insure satisfactory performance, complete the following check list and make all necessary adjustments before initial operation.

1.All safety shields must be in place.

2.Safety and operation decals must be in place, undamaged and clean.

3.Hydraulic hookup must be correct and all connections tight.

4.All bolts and pins which attach backhoe to tractor must be in place. Check tightness of bolts and check that all pins are retained.

5.Tractor must be in proper operating condition.

6.Lubricate backhoe, see MAINTENANCE SECTION.

7.Controls must operate properly. See OPERATION SECTION.

8.Cycle all cylinders slowly to purge air from hydraulic system.

9.Hydraulic system oil level must be correct. Reservoir level should be 1” from top of tank.

OPERATING DIRECTIONS

The terms right, left, front and back shall be from the position of the operator when seated in the operating position on the backhoe.

ENGINE SPEED

Speed at which backhoe operates is dependent on tractor PTO RPM. Use a moderate engine speed to start and increase it as your experience permits.

CONTROLS

The backhoe has two major control levers, Boom/Swing and Crowd/Bucket. These controls are located on the control panel directly ahead of the operator.

The stabilizer control levers are located between the two major control levers.

BOOM/SWING

Push lever forward, boom moves down, away from operator. Pull lever back, boom moves up, toward operator.

Pushing lever farther forward into detent position puts boom into “float”. Float detent position allows boom to drift up or down.

Move lever to left, backhoe swings left. Move lever to right, backhoe swings right.

By moving lever to one of the intermediate positions, boom can be swung left or right at the same time as it is being raised or lowered, performing two operations simultaneously.

Swing left and lower boom by moving control lever forward and to the left.

Swing left and raise boom by moving control lever back and to the left.

Swing right and lower boom by moving control lever forward to the right.

Swing right and raise boom by moving control lever back and to the right.

CROWD/BUCKET

Push lever forward, dipperstick moves away from operator. Pull lever back, dipperstick moves toward operator.

Move lever to left, bucket curls in. Move lever right, bucket extends out.

By moving lever to one of the intermediate positions, dipperstick can be extended or retracted at the same time as bucket is being loaded or dumped.

Move dipperstick away and extend bucket by moving lever forward and to the right.

Move dipperstick away and curl bucket by moving lever back and to the right.

Move dipperstick away and extend (dump) bucket by moving lever forward and to the right.

Move dipperstick toward operator and extend bucket by

F-4145 01/11

Operation Section 4-2

© 2011 Alamo Group Inc.

Page 33 Page 35
Page 34
Image 34
Alamo 95C manual PRE-OPERATION Checklist, Operating Directions, Engine Speed, Controls, Boom/Swing, Crowd/Bucket
Page 33 Page 35

95C specifications

The Alamo 95C is a sophisticated compact tractor that has been designed to meet the demands of both agricultural and light industrial applications. With its robust construction and versatile functionalities, it has become a popular choice among farmers, landscapers, and small property owners.

One of the standout features of the Alamo 95C is its powerful engine. Equipped with a reliable diesel power plant, it delivers impressive performance while maintaining fuel efficiency. The engine is tailored to produce high torque at low RPM, ensuring that the tractor can handle tough tasks with ease, from plowing fields to hauling heavy loads.

The Alamo 95C is designed for ease of operation. It features an ergonomic control layout and a comfortable operator platform, allowing for prolonged use without causing fatigue. The intuitive controls and simplified interface make it accessible even for less experienced operators. Its tight turning radius enhances maneuverability, making it ideal for working in confined spaces.

In terms of technology, the Alamo 95C is outfitted with modern electronic systems that improve overall performance and efficiency. The tractor comes with a digital dashboard that provides real-time data on engine parameters, fuel levels, and other vital statistics. This allows operators to monitor performance closely and make informed decisions while working.

The Alamo 95C is also designed with versatility in mind. It can be outfitted with a range of attachments, including loaders, backhoes, and mowers, enabling it to adapt to various tasks. The three-point hitch system allows for easy attachment of implements, while the Power Take-Off (PTO) system ensures that it can power a variety of tools and equipment.

Durability is another key characteristic of the Alamo 95C. Its frame is constructed from high-quality materials, ensuring it can withstand harsh working conditions. Additionally, it has been engineered for ease of maintenance, with accessible components that simplify routine checks and repairs.

Overall, the Alamo 95C combines power, efficiency, and versatility, making it an excellent investment for anyone looking to maximize productivity on their property. With its advanced features and robust design, it continues to set a standard in the compact tractor market. Whether for agricultural purposes or landscaping tasks, the Alamo 95C proves to be a dependable and efficient workhorse.