Manuals / Alamo / Lawn and Garden / Compact Excavator

Alamo 95C manual Valve Service, Main Relief Replacement, Spool Seal Installation, Torque Settings

Models: 95C

1 56
Download 56 pages 20.68 Kb
Page 49
Image 49

MAINTENANCE

VALVE SERVICE

Top of valve is defined as side where joysticks are installed.

Before servicing valve, make sure backhoe has boom locked, stabilizers locked, and dipper in down position. Shut off tractor and relieve pressure by activating valve handles. Use a drip pan below backhoe to catch any escaping oil during removal of valve.

WARNING: Failure to lock booms and stabilizer and relieve pressure in valve can cause serious injury from equipment falling when hydraulic pressure is released by the removal of valve.

MAIN RELIEF REPLACEMENT

1.Use a socket to remove main relief from valve housing.

2.Inspect new relief to ensure seal is properly installed, and apply grease around the relief.

3.Ensure that pressure setting stamped on new relief matches the setting of old relief.

4.Install o-rings on relief.

5.Insert relief and torque to 60 ft./lbs.

SPOOL SEAL INSTALLATION

1.Remove the mechanical joystick kit from the top of the valve and the return kit from the bottom.

2.Remove the old o-rings and leave spool in housing, making sure spool is in center position.

3.Lightly oil one seal and insert it in top of valve. Slide the seal into position in the groove in the valve body, making sure that it does not fall into the spool groove.

4.Lightly oil a second o-ring and insert in bottom of valve. Slide the seal into position in the groove in the valve body making sure it does not fall into the spool groove. Do not push on the spool as it may cause the first seal to come out of the groove.

WARNING: If either of the seals falls in the spool groove, it may be cut when the spool moves. If this happens, make sure to gently remove the seal from the groove, and reposition seal after inspecting for cuts in the housing groove once the spool is back in center position.

5.Reinstall the mechanical joystick kit on the top of the valve and return kit on the bottom.

TORQUE SETTINGS

1.Main Relief Body: 60 ft./lbs.

2.Load Check Valve: 15 ft./lbs.

3.Screws: 4 ft./lbs.

F-4145 01/11

Maintenance Section 5-7

© 2011 Alamo Group Inc.

MAINTENANCE

Page 48 Page 50
Page 49
Image 49
Alamo 95C manual Valve Service, Main Relief Replacement, Spool Seal Installation, Torque Settings
Page 48 Page 50

95C specifications

The Alamo 95C is a sophisticated compact tractor that has been designed to meet the demands of both agricultural and light industrial applications. With its robust construction and versatile functionalities, it has become a popular choice among farmers, landscapers, and small property owners.

One of the standout features of the Alamo 95C is its powerful engine. Equipped with a reliable diesel power plant, it delivers impressive performance while maintaining fuel efficiency. The engine is tailored to produce high torque at low RPM, ensuring that the tractor can handle tough tasks with ease, from plowing fields to hauling heavy loads.

The Alamo 95C is designed for ease of operation. It features an ergonomic control layout and a comfortable operator platform, allowing for prolonged use without causing fatigue. The intuitive controls and simplified interface make it accessible even for less experienced operators. Its tight turning radius enhances maneuverability, making it ideal for working in confined spaces.

In terms of technology, the Alamo 95C is outfitted with modern electronic systems that improve overall performance and efficiency. The tractor comes with a digital dashboard that provides real-time data on engine parameters, fuel levels, and other vital statistics. This allows operators to monitor performance closely and make informed decisions while working.

The Alamo 95C is also designed with versatility in mind. It can be outfitted with a range of attachments, including loaders, backhoes, and mowers, enabling it to adapt to various tasks. The three-point hitch system allows for easy attachment of implements, while the Power Take-Off (PTO) system ensures that it can power a variety of tools and equipment.

Durability is another key characteristic of the Alamo 95C. Its frame is constructed from high-quality materials, ensuring it can withstand harsh working conditions. Additionally, it has been engineered for ease of maintenance, with accessible components that simplify routine checks and repairs.

Overall, the Alamo 95C combines power, efficiency, and versatility, making it an excellent investment for anyone looking to maximize productivity on their property. With its advanced features and robust design, it continues to set a standard in the compact tractor market. Whether for agricultural purposes or landscaping tasks, the Alamo 95C proves to be a dependable and efficient workhorse.