(S3PT-11)

OPERATION

OPERATION

Shorten the driveline profiles as follows:

•Remove the driveline from the tractor.

•Raise and lower the mower to find the position with the shortest distance between the tractor PTO shaft and cutter gearbox. Shut down the tractor and securely block the mower in this position.

•Pull driveline apart and reattach yoke to PTO shaft.

•Hold driveline sections parallel to one another and measure back 1” from yoke of each shaft and place mark on opposite section. Cut this length off with a saw.

•Round off all sharp edges and debur.

•Thoroughly grease then reinstall the driveline.

•Recheck for proper operation.

Engagement Check Procedure

•With the driveline attached, raise and lower the mower within its operating range. Position the mower to the point where the telescoping driveline is at its maximum extension. Completely shut down the tractor and secure in position.

•Mark the inner driveline shield 1/8” from the end of the outer shield.

•Disconnect the driveline from the tractor and separate the two driveline halves.

•Measure the distance from the mark to the end of the inner profile. This length is the amount the driveline profiles were engaged.

•If the engaged length is less than 9”, the shaft is considered too short and should be replaced with a longer shaft. Consult an authorized dealer to purchase the required driveline length.

NOTE: When raising the mower, at least 1” clearance must be maintained between the driveline and the mower deck. If necessary, place an upper lift stop on the 3-point hitch control lever to limit the height the mower can be raised. OPS-R-0005_E

10. PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the implement and tractor must be performed. This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time and repair cost can be avoided. OPS-U-0029

Always disconnect the main PTO Driveline from the Tractor before performing service on the Implement. Never work on the Implement with the tractor PTO driveline connected and running. Rotating Parts, Blades or Drivelines could turn without warning and cause immediate entanglement, injury or death.

A60/A72 01/08

Operation Section 4-14

©2008 Alamo Group Inc.

Page 99 Page 101
Page 100
Image 100
Alamo A72, A60 manual PRE-OPERATION Inspection and Service, Shorten the driveline profiles as follows
Page 99 Page 101

A60, A72 specifications

The Alamo A72 and A60 are two notable models that have made an impact in the realm of automotive technology, specifically in the category of compact cars. Both models exemplify a blend of performance, efficiency, and innovative design which caters to the needs of modern drivers.

The Alamo A72 is known for its robust performance and superior handling. It is equipped with a dynamic petrol engine that not only offers impressive horsepower but also maximizes fuel efficiency. This model boasts a lightweight chassis which enhances agility and provides a more responsive driving experience. The A72 also features an advanced suspension system that improves stability and comfort on various terrains, making it suitable for both urban commutes and long-distance travels.

One of the standout technologies in the Alamo A72 is its infotainment system, which includes a high-resolution touchscreen display. This system is compatible with both Android Auto and Apple CarPlay, allowing seamless integration with smartphones for navigation, music, and communication. Additionally, the A72 offers an array of safety features, including advanced driver assistance systems such as lane departure warning, automatic emergency braking, and adaptive cruise control. These features work together to provide peace of mind during every journey.

On the other hand, the Alamo A60 is tailored to those seeking a more compact and economical option without compromising on quality. Featuring a smaller, yet efficient engine, the A60 is designed for maximizing fuel efficiency, making it an ideal choice for city driving. It incorporates lightweight materials which not only contribute to its fuel economy but also enhance maneuverability in tight spaces.

The Alamo A60 is equipped with essential technology including a user-friendly infotainment interface, Bluetooth connectivity, and a rearview camera. While it may not possess all the advanced features of the A72, the A60 ensures that safety remains a priority with standard features like multiple airbags and stability control systems.

In summary, both the Alamo A72 and A60 encapsulate the innovative spirit of Alamo's engineering. With their focus on performance, safety, and connectivity, these models cater to a wide range of drivers looking for reliability and efficiency in their vehicles. Whether opting for the sporty A72 or the economical A60, consumers can be assured they are making a choice rooted in quality and advanced technology.
Top Page Image Contents