![](/images/new-backgrounds/1111326/111326209x1.webp)
OPERATION
•Ensure rubber deflectors are in position and not damaged. Replace worn, broken, and missing sections immediately.
•Ensure the rollers are in good condition and rotate freely.
•Inspect that all bolts and screws are in position and are properly torqued.
•Inspect the condition of the drive belts.
•Ensure the slip clutch is properly adjusted and the friction plates are not frozen together. Reference the Maintenance Section for proper slip clutch maintenance.
•Ensure the slip clutch shield and drive belt shields are in place and in good repair.
•Ensure the tractor PTO master shield is in place, lowered and in good condition.
•Check the oil level in tank and replenish if needed. NOTE: Do not fill the tank with oil above the level of the sight gauge. Overfilling the tank with oil after initial filling may result in oil being discharged through the air filter on the top of the hydraulic tank.
•Perform scheduled lubrication as specified in the maintenance section.
GRASS KING 03/09 | Operation Section |
© 2009 Alamo Group Inc.