Alamo none manual Operation

(SG-15)

OPERATION

OPERATION

•Inspect cutter knives and knife pins for looseness and excessive wear. Make sure the mower is securely blocked up before crawling beneath. Replace damaged, worn, and missing knives as complete sets to maintain cuttershaft balance.

•Remove any grass or other debris which may be wrapped around the cuttershafts.

•Inspect the condition of deck skid shoes and hardware. OPS-F-0041

•Check for hydraulic oil leaks on the cylinders, along the hydraulic lines, and at tractor hydraulic ports.

•Ensure each hydraulic cylinder is installed and retained correctly. Ensure the proper size pins are used to retain the cylinders in place and are secured with pins.

•Check the condition of the flail unit hinge pins.

•Check the overall condition of the mower main frame.

•Inspect mower tire condition, wheel bearings, and lug nut torque. OPS-F-0042

Do not operate this Equipment with hydraulic oil or fuel leaking. Oil and fuel are explosive and their presence could present a hazard. Do not check for leaks with your hand! High-pressure oil streams from breaks in the line could penetrate the skin and cause tissue damage including gangrene. To check for a hose leak, SHUT the unit ENGINE OFF and remove all hydraulic pressure. Wear oil impenetrable gloves, safety glasses and use Cardboard to check for evidence of oil leaks. If you suspect a leak, REMOVE the HOSE and have it tested at a Dealer. If oil does penetrate the skin, have the injury treated immediately by a physician knowledgeable and skilled in this procedure.

GRASS KING 03/09 Operation Section 4-20

© 2009 Alamo Group Inc.