Lower the memory module into the socket and press firmly using both thumbs until the module snaps into place.
Repeat step 1, 2 & 3 for the remaining memory modules setting.
＊The pictures shown above are for reference only. Your mainboard configuration may vary with the pictures shown.
Back Panel Configuration
PS/2 Mouse & Keyboard Connectors: JKBMS1
This mainboard provides a standard PS/2 mouse connector and PS/2 Keyboard connector. The pin assignments are described below:
PS/2 Mouse
PS/2 Keyboard
Pin | Assignment | Pin | Assignment |
1 | Data | 4 | +5 V (fused) |
2 | No connect | 5 | Clock |
3 | Ground | 6 | No connect |
Serial and Parallel Interface Ports
The mainboard is equipped with one serial port and one parallel port on the back panel. These interface ports will be explained as below.
9
