1.2Getting started
1.2.1Set-up
Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off your phone and remove battery before inserting or removing the SIM card.
Insert the SIM card with the chip facing downwards into the slot until it is locked. To remove it, gently push the SIM card until it is unlocked.
Installing or removing the battery
Please power off your phone before removing the battery.
Installing and removing the microSD card
Insert the external microSD card into the slot with the gold contact facing down. To remove the external microSD card, gently press and slide it out.
Before removing the microSD card, you should ensure the
phone is off, to protect it from corruption or damage. In addition, regularly removing or inserting the SD card may cause the phone to restart.
Charging the battery
•Insert and click the battery into place, then close the phone cover.
•Unclip the cover, then remove the battery.
6
IP4543_6010_QG_Eng_GB_05_130305.indd 6-7
Connect the battery charger to your phone and mains socket respectively.
The charging status bar will not float if your battery is extendly consumed. To reduce power consumption and energy waste, when battery is fully charged, disconnect your charger from the plug; switch off
7
