Alcatel 665A Getting started, Set-up, Removing and installing the battery Charging the battery

Models: 665A

1 43
Download 43 pages 56.78 Kb
Page 8
Image 8

1 Getting started .....................

1.1Set-up

Removing and installing the back cover

Inserting and removing the SIM card (1)

Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press it and slide it out.

Removing and installing the battery

Charging the battery

Connect the battery charger to your cellphone and outlet respectively.

The charging may take about 20 minutes to start if the battery is flat.

Be careful not to force the plug into the socket.

Make sure the battery is correctly inserted before connecting the charger.

The outlet must be near to the cellphone and easily accessible (avoid electric extension cables).

(1)Check with your network operator to make sure that your SIM card is 3V or 1.8V compatible. The old 5 Volt cards can no longer be used. Please contact your operator.

13

14

Page 8
Image 8
Alcatel 665A manual Getting started, Set-up, Removing and installing the battery Charging the battery