Alcatel 710A manual Troubleshooting, Carry out the following checks

Models: 710A

1 47
Download 47 pages 2.44 Kb
Page 45
Image 45

23 Troubleshooting ................

Before contacting the aftersales department, you are advised to follow the instructions below:

You are advised to switch off the cellphone from time to time to optimize its performance.

You are advised to fully charge () the battery for optimal operation.

Avoid storing large amounts of data in your cellphone as this may affect the performance of your cellphone.

and carry out the following checks:

My cellphone will not switch on

Press until the screen comes on

Check the battery charge level

Check the battery contacts, remove and reinstall your battery, then turn your cellphone back on

My cellphone has not responded for several minutes

Press the key

Remove the battery and re-insert it, then switch the cellphone back on

My screen is difficult to read

Clean your screen

Use your cellphone in accordance with the recommended conditions of use

My cellphone turns off by itself

Check that your keypad is locked when you are not using your cellphone

Check the battery charge level

My cellphone will not charge properly

Make sure that your battery is not completely discharged; the battery charge indicator can take several minutes and may be accompanied by a quiet whistling sound

Make sure charging is carried out under normal conditions (0°C +40°C)

Make sure your battery is inserted. It must be inserted before plugging in the charger

Make sure you are using an Alcatel battery and charger in the box

When abroad, check that the electrical current is compatible

My cellphone will not connect to a network

Try connecting in another location

Verify the network coverage with your operator

Check with your operator that your SIM card is valid

Try selecting the available network(s) manually (see page 79)

Try connecting at a later time if the network is overloaded

SIM card error

Make sure the SIM card has been correctly inserted (see page 13)

Verify with your operator that your SIM card is 3V or 1.8V compatible; the old 5V SIM cards cannot be used

Make sure the chip on your SIM card is not damaged or scratched

Unable to make outgoing calls

Make sure you have dialled a valid number and press the key

For international calls, check the country and area codes

Make sure your cellphone is connected to a network, and that the network is not overloaded or unavailable

Check your subscription status with your operator (credit, SIM card valid, etc.)

Make sure you have not barred outgoing calls (see page 43)

Unable to receive incoming calls

Make sure your cellphone is switched on and connected to a network (check for overloaded or unavailable network)

Check your subscription status with your operator (credit, SIM card valid, etc.)

Make sure you have not forwarded incoming calls (see page 43)

Make sure that you have not barred certain calls

The caller’s name does not appear when a call is received

Check that you have subscribed to this service with your operator

Your caller has concealed his/her number

The sound quality of the calls is not optimal

You can adjust the volume during a call by means of the Volume key

Check the network strength

I am unable to use the features described in the manual

Check with your operator to make sure that your subscription includes this service

Make sure this feature does not require an Alcatel accessory

87

88

Page 45
Image 45
Alcatel 710A manual Troubleshooting, Carry out the following checks