![](/images/new-backgrounds/1270069/2700697x1.webp)
1.2Getting started
1.2.1Set-up
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off your phone before inserting or removing the SIM card.
Your phone only support
To install, take off
Installing and removing the microSD card
To install, take off microSD card protector, insert the microSD card into the slot on the left side with chip facing downward, and then cover the slot.To remove the external microSD card, please take off microSD card protector and take it out from the slot.
Before removing the microSD card, you should ensure the phone is off, to protect it from corruption or damage. In addition, regularly removing or inserting the SD card may cause the phone to restart.
Charging the battery
Connect the battery charger to your phone and outlet respectively then the charging status bar will float.
The charging status bar will not float if your battery is extendly consumed. To reduce power consumption and energy waste, when battery is fully charged, disconnect your charger from the plug; switch off
1.2.2Power on your phone
Hold down the Power key until the phone powers on. It will take some seconds before the screen lights up.
Set up your phone for the first time
The first time you power on the phone, you should set following options: language, date & time, etc.
1.2.3Power off your phone
Hold down the Power key until the Phone options appear, select
Power off.
6
IP4609_8008W_QG_Eng_USA_06_130619.indd
7