1 Getting started .....................

1.1Set-up

Removing and installing the back cover

Inserting and removing the SIM card (1)

Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press it and slide it out. one touch 506D, two SIM cards can be inserted.

(1)Check with your network operator to make sure that your SIM card is 3V or 1.8V compatible. The old 5 Volt cards can no longer be used. Please contact your operator.

Removing and installing the battery

Charging the battery

Connect the battery charger to your phone and mains socket respectively.

The charging may take about 20 minutes to start if the battery is flat.

Be careful not to force the plug into the socket.

Make sure the battery is correctly inserted before connecting the charger.

The mains socket must be near to the phone and easily accessible (avoid electric extension cables).

13

14

Page 8
Image 8
Alcatel ONE TOUCH 506/506D manual Getting started, Set-up, Removing and installing the battery Charging the battery