ISM4 INSTALLATION & PROGRAMMING MANUAL | 30 |
Edit Mode - Navigate Macros
Press the Front Panel Prev or Next Buttons and observe the LED’s to navigate Source ON and OFF Macros as follows:
| Figure 10 Front Panel Navigation – Edit Mode (Navigating Macros) |
SEQUENCE | In Normal Operating Mode, press for 2 seconds (Indicated by the first blink of the Active Source |
| LED) to enter Edit Mode. This will allow navigation of Source ON and OFF Macros. The Source 1 |
| and Program LED’s will illuminate solid green, by default, to indicate Edit Mode, Source 1 ON |
| Macro selected. Source 1 LED green and Program LED orange indicates Source 1 OFF Macro |
| selected. Source 2 LED green and Program LED green indicates Source 2 ON Macro selected. |
| Source 2 LED green and Program LED orange indicates Source 2 OFF Macro selected, etc. |
PREV | In Edit Mode a quick 1 second press will Navigate to the previous Command Structure. A press |
| of 2 seconds (Indicated by the first blink of the Active Source LED) will navigate to the previous |
| ON or OFF Macro. Wait for the Source LED of the newly selected Command Structure or Macro |
| to flash once before pressing any more buttons. To exit Edit Mode and enter into Normal Mode |
| press the PREV button for 5 seconds (Indicated by the second blink of the Active Source LED) or |
| cycle power off and on. |
NEXT | In Edit Mode a quick 1 second press will navigate to the next Command Structure. A press of 2 |
| seconds (Indicated by the first blink of the Active Source LED) will navigate to the next ON or OFF |
| Macro. Wait for the Source LED of the newly selected Macro to flash once before pressing any |
| more buttons. |
TEST | In Edit Mode press to Test the selected Source ON or OFF Macro. Emitters must be connected |
| to the ISM4 and appropriate Sources to test Macros. |
DELETE | In Edit Mode, a quick 1 second press will delete the current Command Structure. A 2 second |
| press (Indicated by the first blink of the Active Source LED), will delete the current Macro. A press |
| of 5 seconds (Indicated by the second blink of the Active Source LED) will delete the entire Macro |
| Table (all Macros). |
|
|
|
|