Xantech manual ISM4 INSTALLATION & PROGRAMMING MANUAL, Test OFF

ISM4 INSTALLATION & PROGRAMMING MANUAL 23

with the RC68 Toggle Command. The System Reference Device (Source 1) and Sources 2-4 should all turn ON.

Test OFF

6.With all sources turned ON, test the system by pointing the System Remote toward the ISM4 or connected IR Receiver and press the button with the RC68 Toggle Command. The System Reference Device (Source 1) and Sources 2-4should all turn OFF.

7.If any functions were ‘missed’, test the individual ON or OFF Macro for that Source. Re-learn IR Commands and adjust delays as necessary until the system powers up correctly.