1 Getting started .....................

1.1Set-up

Removing or installing the back cover

Inserting or removing the SIM card (1)

You must insert your SIM card to make phone calls. Please power off your cellphone and remove battery before inserting or removing the SIM card.

Installing or removing the battery

Insert and click the battery into place, then close the cellphone cover.

Unclip the cover, then remove the battery.

Charging the battery

Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press and slide it out.

Connect the battery charger

Charging may take about 20 minutes to start if the battery is flat.

Be careful not to force the plug into the socket.

Make sure the battery is correctly inserted before connecting the charger.

(1)Check with your network operator to make sure that your SIM card is 3V or 1.8V compatible. The old 5 Volt cards can no longer be used. Please contact your operator.

13

14

Page 8
Image 8
Alcatel OT-806A Getting started, Set-up, Installing or removing the battery, Unclip the cover, then remove the battery