Alcatel Pixi 3 (4) manual Getting started, Set-up, Installing or removing the battery

1.2Getting started

1.2.1Set-up

Removing or installing the back cover

Inserting or removing the SIM card

You must insert your SIM card to make phone calls. Please power off your phone before inserting or removing the SIM card.

4013X

4013D

Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press and slide it out.

For dual SIM models, both SIM1 and SIM2 can support 2G and 3G networks. If both of them are 3G SIM cards, only one card can support 3G network (1).Your phone only supports mini-SIM card. Do not attempt to insert other SIM types like micro and nano cards, otherwise you may damage your phone.

(1)4013D only.

5

Pixi3-4_4013X_4013D GB QG_Eng_EN_07_150113.indd 5-6

Installing or removing the battery

Please power off your phone before removing the battery.

•Insert and click the battery into place, then close the cover.

•Unclip the cover, then remove the battery.

Installing or removing the microSD card

To install, please open microSD card lock first, and then place the external microSD card into the slot with the gold contact facing down. To remove the external microSD card, please open microSD card lock and take it out from the slot.

Charging the battery

Connect battery charger to your phone and plug into the socket.

If the battery is very low, there will be no indication that power is being received until the charge is sufficient to show the charging status bar. To reduce power consumption and energy waste, once the battery is fully charged, disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the backlight time, etc.

6

2015/1/13 13:56:22