page -30 OmniSwitch Troubleshooting Guide September 2005
ip pimsm debug-type
Configures the type(s) of PIM-SM debug messages to display.
ip pimsm debug-type message_list
no ip pimsm debug-type message_list
Syntax Definitions
message_list Specifies the type(s) of PIM-SM messages to be debugged. Select
supported PIM-SM message types from the list below. You may enter
multiple message types in any order. For example, ip pimsm debug-
type time flash init.
Defaults
N/A
supported message types descriptions
all Enables or disables PIM-SM debugging for all items listed below. The
syntax all can be used to easily turn debugging for all message types on
or off.
assert Enables or disables debugging for Assert Metric messages.
bootstrap Enables or disables debugging for Bootstrap Router (BSR) messages.
crp Enables or disables debugging for Candidate Rendezvous Point (C-RP)
messages.
error Enables or disables debugging for PIM-SM Error messages.
hello Enables or disables debugging for PIM-SM Hello messages.
igmp Enables or disables debugging for Internet Group Management Protocol
(IGMP) messages.
ipmrm Enables or disables debugging for messages exchanged with IP Multi-
cast Routing Manager (IPMRM).
init Enables or disables debugging related to PIM-SM initialization code.
joinprune Enables or disables debugging related to Join/Prune.
mip Enables or disables debugging related to MIP (Management Internal
Protocol).
misc Enables or disables miscellaneous debugging of PIM-SM.
nbr Enables or disables debugging for PIM-SM Neighbor processing.
route Enables or disables debugging for PIM-SM Route processing.
spt Enables or disables debugging related to Shortest-Path Tree (SPT).
time Enables or disables debugging for PIM-SM Timer processing.
tm Enables or disables debugging for PIM-SM Task Manager interaction.