The Disc Cleaning procedure removes surface contaminants such as dust, dirt, finger prints, smudges, smears and stains.
1.Open the kit and remove the cleaning head marked “WET”.
2.Remove the cleaning head cover and then use the plastic end of the brush to remove the cleaning head and the spring.
3.Remove the cleaning solution from the kit. Then, fill the cleaning unit with solution until 80% full.
Note: Upon initial use, a sharp object such as a safety pin must be used to puncture the mouth of the bottle.
4.Then replace the spring and the cleaning head.
5.Open the top cover and place the cleaning heads marked “WET” and “DRY” in their respective places, as indicated on the machine. Once in, rotate each of them in a counterclockwise direction until secure.
4www.aleratec.com