Using the HDD PortaCruiser
Dual Disk RAID Controller (USB) Mode – Normal Only
Main Menu: D1 Drive Select Mode Option
This function allows you to enable or disable the Source drive.
1.Use the arrow buttons (or) to select “D1 Drive Select”. The following screen will be displayed.
D1 Drive Select
| ENT RESET |
ESC MUTE
2.Press ENT to select. The system will prompt you to choose the desired mode.
D1 Drive Select
HDD
| ENT RESET |
ESC MUTE
3.Use the arrow buttons () to select between HDD and Disable and press ENT to select.
D2 Drive Select Mode Option
This function allows you to enable or disable the Target drive.
1.Use the arrow buttons (or) to select “D2 Drive Select”. The following screen will be displayed.
D2 Drive Select
| ENT RESET |
ESC MUTE
2.Press ENT to select. The system will prompt you to choose the desired mode.
D2 Drive Select
HDD
| ENT RESET |
ESC MUTE
3.Use the arrow buttons () to select between HDD and Disable and press ENT to select.
www.aleratec.com45