Using the HDD PortaCruiser
Dual Disk RAID Controller (USB) Mode – JBOD Only
Main Menu: Initial JBOD Option
This function allows you to initialize your disks for JBOD.
1.Use the arrow buttons (or) to select “Initial JBOD”. The following screen will be displayed.
Initial JBOD
| ENT RESET |
ESC MUTE
2.Press ENT to select. The system will then prompt you to confirm that you understand data may be lost.
Data May Be Lost Continue? No
| ENT RESET |
ESC MUTE
3.Use the arrow buttons (or) to select “Yes” and press ENT to select. The new main screen will be shown which displays the new mode and capacity.
USB Mode: JBOD
RAID Cap: 228.9GB
| ENT RESET |
ESC MUTE
46www.aleratec.com