Using the 1:11 HDD Copy Cruiser IDE/SATA

Main Menu

Adv Setup

Adv Setup: Load Default

This function is used to restore all factory settings of the 1:11 HDD Copy Cruiser IDE/SATA back to their original defaults.

1.Press and hold ESC for about three seconds to access the “Adv Setup” menu. The following screen will be displayed.

11. Adv Setup

ENT ESC

2.Use the arrow buttons (or) to select “Load Default”. The following screen will be displayed.

11-07. Adv Setup Load Default

ENT ESC

3.Press ENT to proceed to the following screen:

Load Default Config? Yes

ENT ESC

Press ENT to confirm loading defaults, or press ESC to cancel.

4.When all settings are restored to their original defaults the following information will be displayed.

Load Default

OK

ENT ESC

44www.aleratec.com