2Connections

Unpacking and Inspection

Your Smashup was packed carefully at the factory. The shipping carton was designed to protect the unit during shipping. Please retain this container in the highly unlikely event that you need to return the Smashup for servicing.

The shipping carton should contain the following items:

Smashup with the same serial number as shown on the shipping carton

Power Adapter

This instruction manual

To register your purchase, go to the Alesis website at

www.alesis.com.

Installing in a Rack

The Smashup is designed for tabletop use, but can also be installed in a standard 19" audio equipment rack. For rack mounting, contact your Alesis dealer for the ModFX Rack. This rack shelf holds three ModFX units in a 3-space high 19” rack.

Power

The Smashup comes with an AC power adapter that transforms the voltage from a standard outlet into 9 volts AC (830 mA). Plug the small end of the power adapter cord into the Smashup’s POWER INPUT socket and then plug the adapter itself into a good quality, noise-free AC power source of the proper rating.

The supplied AC line adapter is designed only for the destination to which the unit is shipped. To use the Smashup in another country, contact your Alesis dealer for an Alesis P3 adapter suitable for the electrical system in the country you are traveling to.

Make sure you read the initial Important Safety Instructions chapter at the front of this manual.

Avoid “popping”:

Don’t plug the power adapter into the Smashup until all other audio cables have been hooked up. Make sure your amplifier or powered speakers are switched off when plugging in the Smashup to avoid damage.

17

Page 19
Image 19
Alesis 7-51-0121-A manual Connections, Unpacking and Inspection, Installing in a Rack, Power, Avoid popping