Alesis BassFX user manual Param Direct-Control Parameter for FX2

EFFECT Knob Settings 10

Auto Pan

Pans the signal back and forth from left to right at a constant rate determined by the PARAM setting. Higher values result in increased pan depth.

Pedal Auto Pan

An Auto Pan effect whose depth is controlled by the control pedal.

Octaver

Adds a note an octave lower than the note you are playing. Higher values result in greater intensity. Please see the warning on page 18 regarding the use of this effect.

Pedal Octaver

An Octaver effect whose intensity is controlled by the control pedal.

Turns off FX2.

PARAM (Direct-Control Parameter for FX2)

These parameters work exactly the same way as the direct-control parameter for FX1, with the following additions.

For Ring Mod and Auto Pan, indicates the rate of the effect.

Indicates that the effect assigned to the FX2 module does not have a direct-control parameter (for example, Octaver) or that FX2 is off.

FX3 (Multi-Effect Module 3, Delay-Based Effects)

This module gives you a choice of delay-based effects. A delay is an echo of the original signal that can occur at varying frequency and time. This module includes the following effects from the FX1 module: Chorus, Flanger, Pedal Flanger, Rotary Speaker, Pedal Rotary Speaker, Pitch Transpose, Variable Pitch Transpose Up and Variable Pitch Transpose Down. FX3 also provides the following additional effects:

Doubling

Doubles the signal with a slight delay, creating the effect of two instruments playing at once. Higher values indicate higher intensity.

31