Connections – Chapter 2
Once the proper connection has been made, you must set the desired "wet/dry" balance using the NanoVerb's [MIX] control. The [INPUT] and [OUTPUT] controls of the NanoVerb should be set for unity gain: the volume when the Insert jack is plugged in the mixer should be approximately the same as when the NanoVerb is out of the circuit.
MIXER
INSERT
LEFT INPUT | LEFT OUTPUT |
Using Main Outputs
When you want to add effects to everything on the mixer, you can connect the NanoVerb between the mixer’s outputs and the amplifier’s or tape machine’s inputs. This is done by using two 1/4" mono cables to connect the Left and Right Main Outputs of the mixing console to the [LEFT/MONO] and [RIGHT] inputs of the NanoVerb. The [LEFT] and [RIGHT] outputs of the NanoVerb are then connected to a stereo amplifier, or two input channels of another mixing console (for
NanoVerb Reference Manual | 17 |