Your First Session with the NanoVerb– Chapter 1
CHAPTER 1
YOUR FIRST SESSION WITH THE
NANOVERB
Unpacking and Inspection
Your NanoVerb was packed carefully at the factory, and the shipping carton was designed to protect the unit during shipping. Please retain this container in the highly unlikely event that you need to return the NanoVerb for servicing.
The shipping carton should contain the following items:
•This instruction manual
•Alesis NanoVerb with the same serial number as shown on shipping carton
•AC Power Supply Adapter (Alesis P3)
•NanoVerb Quick Guide/Program Chart
•Alesis warranty card
J | It is important to register your purchase; if you have not already filled out your |
warranty card and mailed it back to Alesis, please take the time to do so now. |
Basic Connections
The NanoVerb will work in many different applications, whether you are connecting an instrument directly into it, or connecting it with a mixing console. Briefly described here are the basic connections to get you up and running quickly. For more information on connections, please refer to Chapter 2.
•Mono In, Mono or Stereo Out. Connect a 1/4" phone cord to the [LEFT/MONO] INPUT of the NanoVerb from a mono source. (The Left input will then feed both inputs.) Connect another 1/4" phone cord from the [LEFT] OUTPUT of the NanoVerb to an amplification system or mixer input. Additionally, you could connect a second 1/4" phone cord to the [RIGHT] OUTPUT for use with a stereo amplification system, or two mixer inputs.
•Stereo. Connect two 1/4" phone cords to the [LEFT/MONO] & [RIGHT] INPUTS of the NanoVerb from a stereo source , and two 1/4" phone cords from the [LEFT/MONO] & [RIGHT] OUTPUTS of the NanoVerb to a stereo amplification
system or two mixer inputs.
FROM INSTRUMENT OR EFFECTS SEND
LEFT INPUT |
|
| RIGHT INPUT | LEFT OUTPUT |
|
RIGHT OUTPUT
If connecting to a mixing console’s aux sends/returns, you will want to turn the [MIX] knob fully clockwise so that the NanoVerb outputs only wet (effected) signal.
Powering Up
After making your connections, turn on the system’s power using this procedure:
NanoVerb Reference Manual | 7 |
